[Previous][Next]
INSPECTION PROCEDURE 4: Door(s) cannot be locked or unlocked by central door locking system.
 
 
 
 
CIRCUIT OPERATION
No operation of the door lock actuator or a malfunction of the liftgate lock actuator is suspected.
 
 
TROUBLESHOOTING HINTS
  • Malfunction of the door lock actuator
  • Damaged wiring harness and connectors
 
 
DIAGNOSIS
STEP 1. Confirmation of the defective door lock actuator or liftgate lock actuator.
Which doors or liftgate is not locked normally?
Front left door : Go to Step 2.
Front right door : Go to Step 4.
Rear left door : Go to Step 6.
Rear right door : Go to Step 8.
 
STEP 2. Front door lock actuator (LH) check
Check that the front door lock actuator (LH) works normally. Refer to Door Latch Assembly Inspection .
Is the check result normal?
Go to Step 3.
Replace the front door lock actuator (LH).
 
STEP 3. Check of short to power supply, short to ground, and open circuit in RR-L, RL-U line between the ETACS-ECU connector and front door lock actuator (LH) connector
Is the check result normal?
Intermittent malfunction (Refer to GROUP 00, How to Use Troubleshooting/Inspection Service Points - How to Cope with Intermittent Malfunction ).
Repair the wiring harness.
 
STEP 4. Front door lock actuator (RH) check
Check that the front door lock actuator (RH) works normally. Refer to Door Latch Assembly Inspection .
Is the check result normal?
Go to Step 5.
Replace the front door lock actuator (RH).
 
STEP 5. Check of short to power supply, short to ground, and open circuit in RR-L, RL-U line between the ETACS-ECU connector and the front door lock actuator (RH) connector
Is the check result normal?
Intermittent malfunction (Refer to GROUP 00, How to Use Troubleshooting/Inspection Service Points - How to Cope with Intermittent Malfunction ).
Repair the wiring harness.
 
STEP 6. Rear door lock actuator (LH) check
Check that the rear door lock actuator works normally. Refer to Door Latch Assembly Inspection .
Is the check result normal?
Go to Step 7.
Replace the rear door lock actuator (LH).
 
STEP 7. Check of short to power supply, short to ground, and open circuit in RR-L, RL-U line between the ETACS-ECU connector and the rear door lock actuator (LH) connector
Is the check result normal?
Intermittent malfunction (Refer to GROUP 00, How to Use Troubleshooting/Inspection Service Points - How to Cope with Intermittent Malfunction ).
Repair the wiring harness.
 
STEP 8. Rear door lock actuator (RH) check
Check that the rear door lock actuator (RH) is in good condition. Refer to Door Latch Assembly Inspection .
Is the check result normal?
Go to Step 9.
Replace the rear door lock actuator (RH).
 
STEP 9. Check of short to power supply, short to ground, and open circuit in RR-L, RL-U line between the ETACS-ECU connector and the rear door lock actuator (RH) connector
Is the check result normal?
Intermittent malfunction (Refer to GROUP 00, How to Use Troubleshooting/Inspection Service Points - How to Cope with Intermittent Malfunction ).
Repair the wiring harness.