REMOVAL AND INSTALLATION
Post-installation operation
Clearance check around the hood (Refer to
).
Adjustment of the hood level and hood striker engagement (Refer to
).
Adjustment of hood height (Refer to
).
Damper and weatherstrip removal
1.
Damper
2.
Hood side damper
3.
Hood weatherstrip
Hood latch and hood lock release cable removal steps
4.
Hood latch
<<A>>
5.
Hood lock release handle
•
Cowl side trim <driver’s side> (Refer to GROUP 52A, Interior Trim
)
•
Front splash shield <driver’s side> (Refer to
)
>>A<<
6.
Hood lock release cable
Hood removal steps
7.
Hood insulator
•
Windshield washer hose and washer nozzles (Refer to GROUP 51, Windshield Washer
)
8.
Hood
9.
Hood support rod
Hood hinge removal
8.
Hood
10.
Hood hinge
REMOVAL SERVICE POINT
<<A>> HOOD LOCK RELEASE HANDLE REMOVAL
1.
Insert a flat-tipped screwdriver as shown.
2.
Pull up the lever.
3.
Slide the hood lock release handle out to remove.
INSTALLATION SERVICE POINT
>>A<< HOOD LOCK RELEASE CABLE INSTALLATION
Engage the hood lock release cable as shown.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
)
)
)
)
