1. Move the selector lever to the "P" range and turn the ignition switch to the "LOCK" (OFF) position. Then, connect scan tool (M.U.T.-III) to the data link connector.
2. Turn the ignition switch to the "ON" position.
3. Use the scan tool (M.U.T.-III) special function to execute "CVT oil degradation level (item number 1: Clear CVT oil degradation level)".
4. Turn the ignition switch to the "LOCK" (OFF) position, and then wait for 10 seconds.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)