MULTIVISION DISPLAY REMOVAL AND INSTALLATION
Pre-removal operation
Removal of Instrument center panel (Refer to GROUP 52A - Instrument Center Panel assembly
)
Post-installation operation
Installation of Instrument center panel (Refer to GROUP 52A - Instrument Center Panel assembly
)
Removal Steps
1.
Multivision display/Bracket/Navigation harness
2.
Bracket (LH/RH)
3.
Navigation harness
>>A<<
4.
Multivision display
5.
GPS antenna
INSTALLATION SERVICE POINT
>>A<< MULTIVISION DISPLAY
The connectors, antenna and cables connected to the multivision display are shown in the figure.
)![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
)
)