RADIO AND CD PLAYER REMOVAL AND INSTALLATION
note
When the radio and CD player are replaced, always turn the ignition switch to the ON position once and then carry out the operation check.
Pre-removal operation
Removal of Instrument center panel (Refer to GROUP 52A - Instrument Center Panel assembly
)
Post-installation operation
Installation of Instrument center panel (Refer to GROUP 52A - Instrument Center Panel assembly
)
Removal Steps
1.
Radio and CD player/Bracket
2.
Bracket (LH/RH)
3.
Radio and CD player
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
)
