COLUMN SWITCH (SWITCH BODY PART) CONTINUITY CHECK
Remove the lighting switch and wiper/washer switch. (Refer to
).
Check that the continuity is present for the same terminal numbers (No. 2-11) of the column switch body connectors that remain on the steering column.
Column switch body
Terminal number
Normal condition
Lighting switch side connector
Wiper/washer switch side connector
2 - 2
3 - 3
4 - 4
5 - 5
6 - 6
7 - 7
8 - 8
9 - 9
10 - 10
11 - 11
Continuity exists (2 ohms or less)
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
).)