[Previous][Next]
REMOVAL AND INSTALLATION
 
 
•Washer tank (Refer to )
•Washer motor (Refer to )
Rear washer nozzle removal steps
•Liftgate trim upper cap (Refer to GROUP 52A, Liftgate Trim )
•Liftgate spoiler (Refer to )
1.Rear washer nozzle assembly
Rear wiper blade removal steps
>>B<<2.Rear wiper blade assembly
>>A<<3.Rear wiper blade
Rear wiper motor removal steps
4.Cover
>>B<<5.Rear wiper arm assembly
6.Rear wiper arm
•Liftgate trim (Refer to GROUP 52A, Liftgate Trim )
7.Rear wiper motor assembly
8.Grommet
Rear washer hose removal steps
•Front wheelhouse splash shield (Refer to GROUP 42A, Splash shield )
•Front/rear scuff plate, cowl side trim, quarter trim, rear pillar trim (Refer to GROUP 52A, Interior Trim )
•Liftgate trim upper cap (Refer to GROUP 52A, Liftgate Trim )
9.Rear washer hose (Liftgate side)
10.Rear washer hose (Body side)
noteFor removal and installation of the wiper and washer switch, refer to GROUP 54A, Column Switch .
 
 
INSTALLATION SERVICE POINTS
 
 
>>A<< REAR WIPER BLADE INSTALLATION
cautionUse a curved backing like that shown for the backing of a wiper blade to ensure sustained wiper wiping performance.
 
 
 
>>B<< REAR WIPER ARM AND REAR WIPER BLADE ASSEMBLY INSTALLATION
Set the wiper blade so that it stops at the specified position.
(A): 15 to 35mm (0.6 to 1.4 in) from the Liftgate window glass end