[Previous][Next]
DTC U0141: ETACS CAN timeout
 
 
caution
  • If DTC U0141 is stored, be sure to diagnose the CAN bus line.
  • Before replacing ECU, ensure that the communication circuit is normal.
 
 
DTC SET CONDITION
When the signal from ETACS-ECU cannot be received, OSS-ECU stores DTC U0141.
 
 
TECHNICAL DESCRIPTION (COMMENT)
Check Conditions
  • When all the following conditions are met.
    1. Power supply mode: ON
    2. ETACS-ECU system voltage is at 10 to 16 V.
Judgment Criterion
  • After the following condition is met, 2,500 ms or more have elapsed.
    1. CAN signal from ETACS-ECU cannot be received.
 
 
TROUBLESHOOTING HINTS
  • Malfunction of the CAN bus line
  • ETACS-ECU malfunction
  • Malfunction of ETACS-ECU power supply circuit
  • Malfunction of OSS-ECU
 
 
DIAGNOSIS
1. Using scan tool (M.U.T.-III), diagnose the CAN bus line.
2. Combination meter diagnostic trouble code check
3. OSS-ECU diagnostic trouble code recheck