[Previous][Next]
Code No. U1073 Bus-off
 
 
caution
  • If there is any problem in the CAN bus lines, an incorrect diagnostic trouble code may be stored. Prior to this diagnosis, diagnose the CAN bus lines (Refer to GROUP 54C - CAN Bus Diagnostics Table ).
  • If diagnostic trouble code U1073 is stored in ASC-ECU, always diagnose the CAN bus line. If there is any fault in the CAN bus lines, an incorrect diagnostic trouble code may be stored. In this case, the stored diagnostic trouble code is not highly reliable.
  • Whenever ECU is replaced, ensure that the CAN bus lines are normal.
  • When the hydraulic unit (integrated with ASC-ECU) is replaced, always carry out the calibration of the steering wheel sensor and the G and yaw rate sensor (Refer to and ).
 
 
DIAGNOSTIC TROUBLE CODE SET CONDITIONS
This diagnostic trouble code is stored when ASC-ECU has ceased the CAN communication (bus off).
 
 
PROBABLE CAUSES
  • The CAN bus line is defective.
  • Malfunction of ASC-ECU
  • ECU malfunction of other system