[Previous][Next]
DISASSEMBLY AND ASSEMBLY
 
 
<FUEL PUMP MODULE>
noteFor the removal and installation procedures, refer to .
Disassembly steps
1.Fuel level sensor and fuel tank temperature sensor
2.Fuel tank differential pressure sensor
>>B<<3.O-ring
4.Fuel cut off valve
>>B<<5.O-ring
6.Fuel pressure regulator holder
7.Clip
8.Spring
9.Reservoir cup
10.Fuel pressure regulator
>>B<<11.O-ring
12.Fuel filter and fuel pump assembly
>>B<<13.O-ring
>>A<<14.Fuel pump filter
>>A<<15.Fuel pump bracket
>>A<<16.Fuel tank pump cushion
>>A<<17.Fuel pump
18.Fuel flange and filter assembly
 
 
ASSEMBLY SERVICE POINTS
 
 
>>A<< FUEL PUMP/FUEL TANK PUMP CUSHION/FUEL PUMP BRACKET/FUEL PUMP FILTER INSTALLATION
Install the parts to the fuel pump so that the dimensions are as shown in the figure.
 

 
 
>>B<< O-RING INSTALLATION
To avoid twisting and damage, apply gasoline before installation of the O-ring.