[Previous][Next]
ACTUATOR TEST REFERENCE TABLE
note*: Continues for 27 minutes. Can be released by pressing the CLEAR key.
M.U.T.-III SCAN TOOL DISPLAYITEM NO.INSPECTION ITEMDRIVE CONTENTSINSPECTION REQUIREMENTNORMAL CONDITION
A/C relay16A/C compressor clutch relayA/C compressor clutch relay turns from OFF to ON.Ignition switch: "ON"Clicks when A/C compressor clutch is driven.
EVAP. emission purge SOL. valve10Evaporative emission purge solenoidSolenoid valve turns from OFF to ON.Ignition switch: "ON"Clicks when solenoid valve is driven.
EVAP. emission ventilation SOL.15Evaporative emission ventilation solenoidSolenoid valve turns from OFF to ON.Ignition switch: "ON"Clicks when solenoid valve is driven.
Fuel pump9Fuel pumpFuel pump operates and fuel is recirculated.Ignition switch: "ON"Listen near the fuel tank for the sound of fuel pump operation.Sound of operation is heard.
Ignition timing 5 BTDC11*Basic ignition timingSet to ignition timing adjustment mode.
  • Engine: idling
  • Connect timing light
5°BTDC
Injector stop1InjectorsSpecified injector is stopped.Engine: warm up, idle (cut the fuel supply to each injector in turn and check cylinders which don't affect idling.)Idle condition is changed by stopping selected cylinder: this can cause an unstable condition and the engine may stall.
Oil control valve17Intake engine oil control valve, exhaust engine oil control valveSwitch the intake engine oil control valve and exhaust engine oil control valve from OFF to ON.Ignition switch: "ON"When the valve is actuated, operating noise is audible.
Radiator fan Hi RLY12Radiator fan relay (high)Fan motor is driven at high speedIgnition switch: "ON"Fan motor rotates at high speed
Radiator fan Lo RLY13Radiator fan relay (low)Fan motor is driven at low speedIgnition switch: "ON"Fan motor rotates at low speed