Diagnosis Procedure
1.
CHECK ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) SYSTEM
With M.U.T.-III SE
Perform Diagnostic Trouble Code for “ABS”.
Is DTC detected?
Check the DTC. Refer to
DTC Index
.
.
2.
ERASE DIAGNOSTIC TROUBLE CODE RESULT
With M.U.T.-III SE
Erase Diagnostic Trouble Code result for “CHASSIS CONTROL”.
Turn the electric motor switch OFF and wait for 10 seconds or more.
:
INSPECTION END
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
With M.U.T.-III SE
Check the DTC. Refer to DTC Index
.
.With M.U.T.-III SE