[Previous][Next]
Diagnosis Procedure
1.PERFORM THE DIAGNOSTIC TROUBLE CODE
  1. Erase all Diagnostic Trouble Code results with M.U.T.-III SE.
  2. Perform “Read All DTCs” with M.U.T.-III SE.
  3. Check if the “U2148-87” is detected as the current malfunction in "Diagnostic Trouble Code" of “Side radar (Rear right)”.
Is “U2148-87” detected as the current malfunction?
Trouble Diagnosis Flow Chart
-1 To check malfunction symptom before repair: Intermittent IncidentIntermittent Incident
-2 Confirmation after repair: INSPECTION END