Check rear bumper near the side radar contaminated with foreign materials.
: .
2.CHECK THE SIDE RADAR
Check side radar and the side radar outskirts contaminated with foreign materials.
: .
3.CHECK THE SIDE RADAR INSTALL CONDITION
Check side radar installation condition (installation position, properly tightened, a bent bracket).
: .
4.INTERVIEW
Ask if there is stain or foreign materials.
Ask if there is any temporary ambient condition such as splashing water, mist or fog.
Ask if there is any object such as ice, frost or dirt obstructing the side radar.
Is any of above conditions seen?
Explain to the customer about the difference between the blockage detection function and the indication when the malfunction is detected and tell them “This is not malfunction”.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
. 
Explain to the customer about the difference between the blockage detection function and the indication when the malfunction is detected and tell them “This is not malfunction”. 
INSPECTION END