1.PERFORM THE DIAGNOSTIC TROUBLE CODE
- Turn the electric motor switch ON.
- Turn the FCM system ON, and then wait for 2 seconds or more.
- Perform “Read All DTCs” with M.U.T.-III SE.
- Check if the “U2156-87” is detected as the current malfunction in "Diagnostic Trouble Code" of “LASER/RADAR”.
Is “U2156-87” detected as the current malfunction?
INSPECTION END
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
Refer to Trouble Diagnosis Flow Chart
.