1.CAMERA AIMING ADJUSTMENT
- Perform the camera aiming. Refer to Work Procedure
. - Erase all Diagnostic Trouble Code results with M.U.T.-III SE.
- Perform “Read All DTCs”.
- Check if the “C1F05-54” is detected in "Diagnostic Trouble Code" of “ICC/ADAS 2”.
Is “C1F05-54” detected?
INSPECTION END
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
Replace the front camera unit. Refer to Removal and Installation