1.CHECK DIAGNOSTIC TROUBLE CODE RESULTS
- Turn the electric motor switch OFF.
- Turn the electric motor switch ON.
- Perform “Read All DTCs” with M.U.T.-III SE.
- Check if any DTC other than “C1F04-48” is detected in "Diagnostic Trouble Code" of “ICC/ADAS 2”.
Is any DTC detected?
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
Replace the ADAS control unit 2. Refer to Removal and Installation
.
Perform the distance sensor alignment. Refer to Work Procedure