When you remove/install or replace the camera, you should check the camera image on the multi around monitor "Bird's eye-view." If necessary, calibrate the camera (Refer to Work Procedure).
To ensure the camera image is clearly visible, wipe the lens with a damped rag and then a dry rag to remove dust, rain drops or snow.
Be careful not to damage the camera. Any damage may have an adverse effect on the screen image.
Pre-removal and Post-installation Operation
Front bumper assembly removal and installation (Refer to Exterior – Front Bumper Removal and Installation)
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
))