[Previous][Next]
DTC Description
 
 
DTC DETECTION LOGIC
DTC No.MUT ScreenDTC Detection condition
B2E1B-97Automatic eCall LockDiagnosis conditionWhen electric motor switch is ON
Signal-
ThresholdSucessful violent Automatic e-Call end
Diagnosis delay time-
 
 
POSSIBLE CAUSE
Automatic e-Call has been detected and normal ended voice call
 
 
FAIL-SAFE
Ecall system does not operate
 
 
DTC Confirmation procedure
1.Perform DTC confirmation procedure
With M.U.T.-III SE
  1. Turn the electric motor switch ON.
  2. Turn the electric motor switch OFF and wait at least 30 seconds.
  3. Turn the electric motor switch ON and wait at least 30 seconds or more.
  4. Select “Diagnostic Trouble Code” mode of “IVC” using M.U.T.-III SE.
  5. Check DTC.
Is DTC B2E1B-97 detected?
Refer to Diagnosis Procedure.
-1To check malfunction symptom before repair: Refer to Intermittent Incident Intermittent Incident.
-2Confirmation after repair: INSPECTION END