[Previous][Next]
DTC Description
 
 
DTC DETECTION LOGIC
DTC No. M.U.T.-III SE screen terms
(Trouble diagnosis content)
DTC detection condition
B2E08–01Microphone
(Microphone)
1Diagnosis conditionWhen electric motor switch is ON.
Signal (terminal)Microphone signal
Threshold7.2 V or more
Diagnosis delay time1 second or more
2Diagnosis conditionWhen electric motor switch is ON.
Signal (terminal)Microphone signal
Threshold0.2 V or less
Diagnosis delay time1 second or more
 
 
POSSIBLE CAUSE
  • Microphone signal circuit short to power supply
  • Microphone signal circuit short to ground
  • Microphone
 
 
FAIL-SAFE
Microphone does not operate
 
 
DTC CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE
With M.U.T.-III SE
  1. Turn the electric motor switch ON.
  2. Turn the electric motor switch OFF and wait at least 30 seconds.
  3. Turn the electric motor switch ON and wait at least 30 seconds or more.
  4. Select “Diagnostic Trouble Code” mode of “IVC” using M.U.T.-III SE.
  5. Check DTC.
Is DTC B2E08-01 detected?
Refer to Diagnosis Procedure.
-1To check malfunction symptom before repair: Refer to Intermittent Incident.
-2Confirmation after repair: INSPECTION END