[Previous][Next]
DTC Description
 
 
DTC DETECTION LOGIC
DTC No. M.U.T.-III SE screen terms
(Trouble diagnosis content)
DTC detection condition
B1360-02 Combination meter
(Combination meter)
Diagnosis conditionWhen electric motor switch is ON
Signal (terminal)AV communication signal
ThresholdCommunication error
Diagnosis delay time1 second or more
 
 
POSSIBLE CAUSE
  • AV communication circuit is open
  • Combination meter power supply and ground circuit
  • Combination meter
 
 
FAIL-SAFE
Steering switch does not operate
 
 
CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE
With M.U.T.-III SE
  1. Turn the electric motor switch ON.
  2. Turn the electric motor switch OFF and wait for 4 minutes.
  3. Turn the electric motor switch ON and wait at least 1 minute or more.
  4. Select “Diagnostic Trouble Code” mode of “MULTI AV” using M.U.T.-III SE.
  5. Check DTC.
Is DTC B1360-02 detected?
Proceed to Diagnosis Procedure.
-1To check malfunction symptom before repair: Refer to Intermittent IncidentIntermittent Incident.
-2Confirmation after repair: INSPECTION END