Diagnosis Procedure
1.
CHECK USB CABLE CONNECTION
Turn electric motor switch OFF.
Check the USB cable connection between AV control unit and front auxiliary input jack.
Is the inspection result normal?
.
Connect the USB cable connector correctly.
2.
PERFORM CONFIRMATION PROCEDURE AGAIN
With M.U.T.-III SE
Turn electric motor switch ON.
Erase DTC.
Perform DTC confirmation procedure again. Refer to
DTC Description
.
Is DTC B132A–01 detected again?
Replace USB cable (between AV control unit and front auxiliary input jack).
Check the intermittent incident. Refer to Intermittent Incident
Intermittent Incident
.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
.
Connect the USB cable connector correctly.
With M.U.T.-III SE.Replace USB cable (between AV control unit and front auxiliary input jack).Check the intermittent incident. Refer to Intermittent IncidentIntermittent Incident.