[Previous][Next]
DTC Description
 
 
DTC DETECTION LOGIC
DTC No. M.U.T.-III SE screen terms
(Trouble diagnosis content)
DTC detection condition
B2744-87BCM
(Body control module)
Diagnosis conditionWhen electric motor switch is ON
Signal (terminal)—
ThresholdCommunication error between sonar control unit and BCM
Diagnosis delay time2 seconds or more
 
 
POSSIBLE CAUSE
  • Sonar control unit
  • BCM
 
 
FAIL-SAFE
—
 
 
CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE
With M.U.T.-III SE
  1. Turn electric motor switch ON.
  2. Turn electric motor switch OFF and wait for 30 seconds.
  3. Turn electric motor switch ON and wait at least 2 seconds or more.
  4. Select “Diagnostic Trouble Code” mode of “SONAR” using M.U.T.-III SE.
  5. Check DTC.
Is DTC B2744-87 detected?
Proceed to Diagnosis Procedure.
-1To check malfunction symptom before repair: Refer to Intermittent IncidentIntermittent Incident.
-2Confirmation after repair: INSPECTION END