Diagnosis Procedure
1.
CHECK DIAGNOSTIC TROUBLE CODE RESULT OF ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)
With M.U.T.-III SE
Check "Diagnostic Trouble Code" of “ABS” using M.U.T.-III SE.
Is any DTC detected?
Perform trouble diagnosis for detected DTC. Refer to
DTC Index
.
.
2.
PERFORM DTC CONFIRMATION PROCEDURE AGAIN
With M.U.T.-III SE
Turn electric motor switch ON.
Erase DTC.
Perform DTC confirmation procedure again. Refer to DTC Description
DTC Description
.
Is DTC B274B-87 detected again?
Replace sonar control unit. Refer to
DTC Description
.
INSPECTION END
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
With M.U.T.-III SE
Perform trouble diagnosis for detected DTC. Refer to DTC Index
.
.With M.U.T.-III SE.Replace sonar control unit. Refer to DTC Description.INSPECTION END