[Previous][Next]
Fail-Safe
The combination meter activates the fail-safe control if CAN communication with each unit is malfunctioning.
FunctionSpecifications
SpeedometerReset to zero by suspending communication.
Powermeter
  • Electric Power is reset to zero by suspending communication.
  • Engine Power is READY OFF by suspending communication.
Drive battery temperature gauge
  • When reception time of an abnormal signal is 2 seconds or less, the last value received.
  • When reception time of an abnormal signal is more than 2 seconds, reset to zero.
Fuel gauge
  • The display turns OFF by suspending communication
  • Displays low fuel warning .
OdometerAn indicated value is maintained at communications blackout.
Distance to emptyThe display turns "– – –" by suspending communication.
Distance to battery emptyThe display turns "– – –" by suspending communication.
Ambient temperatureThe display turns "– – –" by suspending communication.
Shift position indicatorThe display turns OFF by suspending communication.
Illumination control
  • When suspending communication, changes to nighttime mode. (when electric motor switch is ON)
  • When suspending communication, changes to daytime mode. (when electric motor switch is OFF)
Information displayTrip computerCurrent vehicle speedReset to zero by suspending communication.
Current fuel consumptionThe last result calculated during normal condition is indicated.
Average fuel consumption
Average vehicle speed
ECO pedal guideThe display turns OFF by suspending communication.
BuzzerThe buzzer turns OFF by suspending communication.
Warning light/indicator lightABS warning lightThe light turns ON by suspending communication.
ASC warning light
Brake warning light
Electric power steering warning light
Malfunction indicator light (MIL)
12V battery charge warning light
Engine oil pressure warning light
SRS air bag warning light
Electric shift warning light
AEB warning light
RAB warning light
Electric parking brake warning light
Low tire pressure warning light
  • When reception time of an abnormal signal is 60 seconds or less, the light blinking.
  • When reception time of an abnormal signal is more than 60 seconds, the light turns ON.
Electric parking brake indicator lightThe light blinking caused by suspending communication.
High beam indicator lightThe light turns OFF by suspending communication.
Hands OFF warning light
High beam assist indicator light
ASC OFF indicator light
hill start assist indicator light
Turn signal indicator light
Front fog light indicator light
Position light indicator light
Seat belt warning light
Automatic brake hold indicator light