[Previous][Next]
Component Inspection
 
 
1.CHECK STEERING SWITCH
  1. Remove steering switch. Refer to Removal and InstallationRemoval and Installation.
  2. Measure the resistance between the steering switch connector.
    Steering switchConditionResistance
    (Approx.) Ω
    Terminal
    2325SEEK UP switch is pressed2080.54 – 2165.46
    SEEK DOWN switch is pressed639.94 – 666.06
    TEL/VR switch is pressed257.74 – 268.26
    TEL END switch is pressed130.34 – 135.66
    VOL UP switch is pressed49.98 – 52.02
    VOL DOWN switch is pressed1 or less
Is the inspection result normal?
INSPECTION END
Replace steering switch. Refer to Removal and InstallationRemoval and Installation.