Diagnosis Procedure
1.
CHECK LIN COMMUNICATION SIGNAL
Turn the electric motor switch ON.
Check signal between 12V battery current sensor harness connector and ground using an oscilloscope.
(+)
(−)
Signal
12V battery current sensor
Connector
Terminal
H7
3
Ground
Is the inspection result normal?
Replace IPDM E/R. Refer to
Removal and Installation
.
Replace 12V battery current sensor.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
)
Replace IPDM E/R. Refer to Removal and Installation
.
Replace 12V battery current sensor.