[Previous][Next]
System Description
 
 
SYSTEM DIAGRAM
ComponentFunction
Keyless operation keyOperates based on the results of electronic ID verification using two-way communication between the Keyless operation key and the vehicle (Keyless operation key unit).
Door request switchDetects door lock/unlock operation.
Electric motor switchRefer to Electric motor switch.
Door switchDetects door open/close condition.
Combination switch (Lighting & turn signal switch)Inputs the each switch condition signal to BCM.
Front power window motor LHTransmits front power window open/close signal to BCM via LIN communication.
Keyless operation key unitTransmits electric motor switch status signal and door lock/unlock request signal to BCM via CAN communication.
ABS actuator and electric unit (control unit)Transmits vehicle speed signal (ABS) to BCM via CAN communication.
TCUTransmits auto ACC request signal to BCM via CAN communication.
BCMBCM operates the auto ACC function based on each signal state.
Accessory relayControlled by BCM and turns ON/OFF the battery power supply to each parts.
Audio/Navigation
  • Transmits auto ACC request signal to BCM via CAN communication.
  • Auto ACC status signal receives from BCM via CAN communication.
 
 
DESCRIPTION
In conventional vehicles, power is supplied to the accessories of the vehicle after the electric motor switch is pushed to the ACC position.
The AUTO ACC function is a function that bypasses the electric motor switch ACC position and automatically distributes the accessory power supply to each switch and unit by door unlock operation, etc. using the Keyless operation key.
 
 
OPERATION FLOW
 
 
Electric motor switch ON state
In this status the electric motor switch is operated and pushed ON.
 
 
Audio/Navigation use possible state
  • In this status the audio/navigation, and each switch and unit that is activated by the accessory power supply can be operated.
  • When 10 minutes pass after conditions are satisfied while and audio/navigation are not operated, audio/navigation turn OFF.
 
 
Audio/Navigation preparation state
  • In this status audio/navigation are stopped, but the switches and units other than those for audio/navigation that can operate by using the accessory power supply are available until the accessory power supply turns OFF.
  • When audio/navigation is operated within 1 minutes after conditions are satisfied, operation time is extended for 10 minutes. Audio/navigation can be operated for a maximum of 30 minutes after the status is satisfied.
 
 
Function OFF state
In this status the AUTO ACC function stops and power to the accessories is not supplied.
No.Function statusShifting conditionAccessory power supply
Shifting from “Function OFF state” to "Electric motor switch ON state"Any of the following conditions is satisfied.
  • Turn the electric motor switch ON from OFF.
  • Operate electric motor switch and start the engine.
OFF –> ON
Shifting from “Audio/Navigation preparation state” to “Electric motor switch ON state”ON
Shifting from “Audio/Navigation use possible state” to “Electric motor switch ON state”ON
Shifting from “Function OFF state” to “Audio/Navigation preparation state”Any of the following conditions is satisfied.
  • Each door is opened or closed.
  • Close all doors, and lock all doors with the Keyless operation key or door request switch.
  • Operate either the door request switch or the unlock button of the Keyless operation key to unlock the door.
  • Operate lighting switch and turn ON the tail light.
  • Software update of the AV control unit.
  • Map data update.
OFF –> ON
Shifting from “Audio/Navigation preparation state” to “Audio/Navigation use possible state”Operate audio/navigation.ON
Shifting from “Electric motor switch ON state” to “Audio/Navigation use possible state”Turn the electric motor switch OFF from ON while driver door is close with vehicle speed is less than 3 km/h (1.86 mph).ON
Shifting from “Electric motor switch ON state” to “Audio/Navigation preparation state”Turn the electric motor switch OFF from ON while driver door is open with vehicle speed is less than 3 km/h (1.86 mph).ON
Shifting from “Audio/Navigation use possible state” to “Audio/Navigation preparation state”Any of the following conditions is satisfied.
  • Driver door is opened.
  • Close all doors, and lock all doors with the Keyless operation key or door request switch.
  • 10 minutes pass from “Audio/Navigation use possible state”.
ON
Shifting from “Audio/Navigation use possible state” to “Function OFF state”30 minutes pass from “Audio/Navigation use possible state”.ON –> OFF
Shifting from “Audio/Navigation preparation state” to “Function OFF state”1 minutes or 3 minutes pass from “Audio/Navigation preparation state”.ON –> OFF
Shifting from “Audio/Navigation use possible state” time extension (1 minute)Any of the following conditions is satisfied.
  • Each door is opened or closed.
  • Close all doors, and lock all doors with the Keyless operation key or door request switch.
  • Operate either the door request switch or the unlock button of the Keyless operation key to unlock the door.
  • Operate lighting switch and turn ON the tail light.
  • Operate power window main switch and open/close the front power window LH.
  • Software update of the AV control unit.
  • Map data update.
ON
Shifting from “Electric motor switch ON state” (in status of emergency stop) to “Audio/Navigation use possible state”Vehicle speed is less than 3 km/h (1.86 mph) and except driver door is opened.ON
Shifting from “Electric motor switch ON state” (in status of emergency stop) to “Audio/Navigation preparation state”Vehicle speed is less than 3 km/h (1.86 mph) and driver door is opened.ON
Shifting from “Electric motor switch ON state” (in status of temporarily disabling the ignition battery saver) to “Audio/Navigation use possible state”Press and hold the electric motor switch continuously for 3 seconds or more when all of the following conditions are satisfied.
  • Brake pedal: Not depressed
  • Driver door: Close
ON
Shifting from “Electric motor switch ON state” (in status of temporarily disabling the ignition battery save) to “Audio/Navigation preparation state”Press and hold the electric motor switch continuously for 3 seconds or more when all of the following conditions are satisfied.
  • Brake pedal: Not depressed
  • Driver door: Open
ON
Shifting from “Function OFF state” to “Audio/Navigation use possible state”Operate telematics system.OFF –> ON