[Previous][Next]
Diagnosis Procedure
1.CHECK FUSIBLE LINK
  1. Electric motor switch is OFF.
  2. Check that the following IPDM E/R fusible links are not blown (open).
    Signal nameFusible link No.
    Battery power supply32 (30A)
Is the fusible link blown (open)?
Replace the blown (open) fusible link after repairing the affected circuit if a fusible links are blown (open).
.
 
2.CHECK BATTERY POWER SUPPLY VOLTAGE
  1. Disconnect IPDM E/R connector.
  2. Check voltage between IPDM E/R harness connector and the ground.
    +-Voltage
    IPDM E/R
    ConnectorTerminal
    E1182Ground6 – 16 V
    F4181
Is the inspection result normal?
Replace IPDM E/R. Refer to Removal and Installation.
Repair the battery power supply circuit.