[Previous][Next]
DTC Description
 
 
DTC DETECTION LOGIC
DTC No.M.U.T.-III SE screen terms
(Trouble diagnosis content)
DTC detected condition
U1325-54CONFIG INCOMPLETION
(Configuration incompletion)
Diagnosis conditionWhen electric motor switch is ON.
Signal (terminal)—
ThresholdProgramming is incomplete
Diagnosis delay time2 seconds or more
 
 
POSSIBLE CAUSE
  • Programming is incomplete
  • 8CH CAN gateway
 
 
FAIL-SAFE
8CH CAN gateway stops transmitting and receiving the following.
  • CAN communication signals between each CAN communication circuit
  • Ethernet communication signals between each ethernet communication circuit