[Previous][Next]
DTC Description
 
 
DTC DETECTION LOGIC
DTC No.M.U.T.-III SE screen terms
(Trouble diagnosis content)
DTC detected condition
B2600-46CONFIG ERROR
(Configuration error)
Diagnosis conditionWhen electric motor switch is ON.
Signal (terminal)—
ThresholdErrors are detected in the programming data stored in the 8CH CAN gateway
Diagnosis delay time2 seconds or more
 
 
POSSIBLE CAUSE
8CH CAN gateway
 
 
FAIL-SAFE
8CH CAN gateway stops transmitting and receiving the following.
  • CAN communication signals between each CAN communication circuit
  • Ethernet communication signals between each ethernet communication circuit