[Previous][Next]
DTC Description
 
 
DTC DETECTION LOGIC
DTC No.M.U.T.-III SE screen items
(Trouble diagnosis content)
DTC Detection Condition
U1C01-08LIN communication
(Local interconnect network communication)
Diagnosis conditionElectric motor switch is ON or OFF (auto ACC status).
Signal (terminal)LIN communication signal
ThresholdBCM detects LIN communication error.
Diagnosis delay time1 second or less
 
 
POSSIBLE CAUSE
  • LIN communication line
  • Hands free sensor control unit
  • BCM
 
 
FAIL-SAFE
–
 
 
DTC CONFIRMATION PROCEDURE
1.CHECK SELF DIAGNOSTIC RESULT
With M.U.T.-III SE
  1. Electric motor switch ON.
  2. Perform "Diagnostic Trouble Code" mode of "BCM" using M.U.T.-III SE.
Is DTC detected?
Refer to Diagnosis Procedure.
-1To check malfunction symptom before repair: Refer to Intermittent IncidentIntermittent Incident.
-2Confirmation after repair: INSPECTION END