[Previous][Next]
DTC Description
 
 
DTC DETECTION LOGIC
DTC No.M.U.T.-III SE screen items
(Trouble diagnosis content)
DTC detection condition
B20E2–96LED HEADLIGHT RH
(Light emitting diode headlight right hand)
[CMPNENT INTERNAL MLFNCTN]Diagnosis conditionTurn the electric motor switch ON
Signal (terminal)Headlight warning signal (via LIN communication)
ThresholdDetected a malfunction of headlight RH (LO) circuit
Diagnosis delay time1 second or less
 
 
POSSIBLE CAUSE
  • Headlight RH
    • LED [Headlight (LO)]
    • LED headlight control module
 
 
FAIL-SAFE
  • Transmits the headlight warning signal (CAN communication) to the combination meter. (When the electric motor switch turns ON, the headlight warning is displayed on the information display of the combination meter.)
  • Transmits the request signal (via LIN communication) to the both side LED headlight control module, and turns ON the headlight (LO) and parking light.
 
 
DTC CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE
With M.U.T.-III SE
  1. Turn the electric motor switch ON.
  2. Select “Diagnostic Trouble Code” mode of “IPDM E/R” using M.U.T.-III SE.
  3. Check DTC.
Is DTC detected?
-1To check malfunction symptom before repair: Refer to Intermittent IncidentIntermittent Incident.
-2Confirmation after repair: INSPECTION END