[Previous][Next]
Disassembly and Assembly
 
 
Disassembly steps
1.Glass mirror
2.Door mirror cover upper
3.Door mirror cover lower
4.Side camera bracket <Vehicles with multi around monitor>
5.Side camera <Vehicles with multi around monitor>
6.Side turn signal light
7.Door mirror actuator
8.Door mirror main wiring harness connector <Vehicles with electric folding door mirror>
9.Door mirror gasket
10.Door mirror base cover
11.Screw
12.Door mirror base
13.Power folding unit <Vehicles with multi around monitor>
14.Door mirror housing
Required special tools:
  • MB990784: Ornament remover
 
 
DISASSEMBLY SERVICE POINTS
 
 
<<A>> GLASS MIRROR REMOVAL
Insert the special tool ornament remover (MB990784) in the glass mirror to remove it.
 
 
 
<<B>> DOOR MIRROR COVER LOWER REMOVAL
1. Remove door mirror cover lower fixing screws.
2. Disengage door mirror cover lower claw, and then remove door mirror cover lower.
 
 
 
 
ASSEMBLY SERVICE POINT
 
 
>>A<< DOOR MIRROR MAIN HARNESS CONNECTOR INSTALLATION
Check the wire color of the wiring harness, and insert it into the connector as shown in the illustration.
Terminal NoWire colorTerminal NoWire color
1Red/White9Light/Green
2Yellow/Black10Blue/Black
3White11Green
412Black/White
5Yellow13Pink
6Purple14Blue
7Black15Orange
816