[Previous][Next]
Removal and Installation
 
 
Front fillet molding removal
1.Front fillet molding
2.Reflector
Rear fillet molding removal
3.Rear fillet molding
 
 
REMOVAL SERVICE POINT
 
 
<<A>> FRONT/REAR FILLET MOLDING REMOVAL
cautionTake care not to break the clips when disengaging them.
To disengage the clips in order from the front/rear bumper fascia side, insert a clip remover covered with soft waste cloth (synthetic fiber) into the clearance between the fender and the fillet molding.