System Description

SYSTEM DIAGRAM

Component	Function
Front door switch	Detects front door open/close condition and transmits door switch signal to BCM.
BCM	Controls retained power function.
Sunroof switch assembly	Refer to Sunroof Switch Assembly.
Sunroof motor assembly	Refer to Sunroof Motor Assembly.
Sunshade motor assembly	Refer to Sunshade Motor Assembly.

SUNROOF SYSTEM

The sunroof motor assembly receives the signal from the sunroof switch assembly to operate the sunroof, and transmits the signal from the sunroof switch assembly to the sunshade motor assembly via communication line.
The sunshade motor assembly operates the sunshade with the operate signal received from the sunroof switch assembly or the communication line received from the sunroof motor assembly.

OPERATION DESCRIPTION

The sunroof and sunshade operate as per the following by operating the sunroof switch and sunshade switch.

Before operation	Switch operation	Sunroof and sunshade action	After operation
Sunroof: Fully-closed Sunshade: Fully-closed : Sunroof : Sunshade	Sunroof switch PUSH	Sunshade: OPEN (Half-open) Sunroof: Tilt up
	Sunshade switch OPEN	Sunshade: OPEN (Half-open)
	Sunroof switch OPEN	Sunshade: OPEN (Half-open) Sunroof: OPEN (Comfort position)
	Sunroof switch CLOSE Sunshade switch CLOSE	Not action	—
Sunroof: Tilt up Sunshade: Fully-open : Sunroof : Sunshade	Sunroof switch OPEN	Sunroof: Comfort position
	Sunroof switch CLOSE	Sunroof: Tilt down
	Sunshade switch CLOSE	Sunshade: CLOSE (Half-open)
	Sunroof switch PUSH Sunshade switch OPEN	Not action	—
Sunroof: Tilt up Sunshade: Half-open : Sunroof : Sunshade	Sunroof switch OPEN	Sunroof: Comfort position
	Sunroof switch CLOSE	Sunroof: CLOSE
	Sunshade switch OPEN	Sunshade OPEN (Fully-open)
	Sunroof switch PUSH Sunshade switch CLOSE	Not action	—
Sunroof: Fully-close Sunshade: Fully-open : Sunroof : Sunshade	Sunroof switch PUSH	Sunroof: Tilt up
	Sunroof switch OPEN	Sunroof: Comfort position
	Sunshade switch CLOSE	Sunshade: CLOSE (Half-open)
	Sunroof CLOSE Sunshade switch OPEN	Not action	—
Sunroof: Fully-close Sunshade: Half-open : Sunroof : Sunshade	Sunroof switch PUSH	Sunroof: Tilt up
	Sunroof switch OPEN	Sunroof: Comfort position
	Sunshade switch OPEN	Sunshade: OPEN (Fully-open)
	Sunshade switch CLOSE	Sunshade: CLOSE
	Sunroof switch CLOSE	Not action	—
Sunroof: Comfort position Sunshade: Fully-open : Sunroof : Sunshade	Sunroof switch OPEN	Sunroof: OPEN (Fully-open)
	Sunroof switch CLOSE	Sunroof: CLOSE
	Sunshade switch CLOSE	Sunshade: CLOSE (Half-open)
	Sunroof switch PUSH Sunshade switch OPEN	Not action	—
Sunroof: Comfort position Sunshade: Half-open : Sunroof : Sunshade	Sunroof switch OPEN	Sunroof: OPEN (Fully-open)
	Sunroof switch CLOSE	Sunroof: CLOSE
	Sunshade switch OPEN	Sunshade: OPEN (Fully-open)
	Sunroof switch PUSH Sunshade switch CLOSE	Not action	—
Sunroof: Fully-open Sunshade: Fully-open : Sunroof : Sunshade	Sunroof switch CLOSE	Sunroof: CLOSE (Fully-close)
	Sunshade switch CLOSE	Sunshade: CLOSE (Half-open)
	Sunroof switch PUSH Sunroof switch OPEN Sunshade switch OPEN	Not action	—
Sunroof: Fully-open Sunshade: Half-open : Sunroof : Sunshade	Sunroof switch CLOSE	Sunroof: CLOSE (Fully-close)
	Sunshade switch OPEN	Sunshade: OPEN (Fully-open)
	Sunroof switch PUSH Sunroof switch OPEN Sunshade switch CLOSE	Not action	—

AUTO OPERATION

The sunroof and sunshade operates automatically by operating the sunroof switch assembly.

note	If initialization setting is not performed, the automatic function does not operate. During automatic operation, when the sunroof switch assembly is operated, automatic operation can be stopped.

RETAINED POWER FUNCTION

Retained power operation is an additional power supply function that enables sunroof system to operate for 45 seconds after electric motor switch is turned OFF.

RETAINED POWER FUNCTION CANCEL CONDITIONS

Any of the following conditions is satisfied.

Front door CLOSE (door switch OFF)→OPEN (door switch ON)
When electric motor switch is ON again.
When timer time passes. (45 seconds)

LIN COMMUNICATION

Sunroof motor assembly, sunshade motor assembly and BCM transmit and receive signal by LIN communication.

ANTI-PINCH FUNCTION

The sunroof motor assembly monitors the sunroof condition using the signals from sunroof motor. When sunroof motor assembly detects an interruption during auto operation (close or tilt down operation), sunroof motor will tilt up or open [150 mm (5.91 in) or more] sunroof .
The sunshade motor assembly monitors the sunshade condition using the signals from sunshade motor. When sunshade motor assembly detects an interruption during auto close operation, sunshade motor will open [150 mm (5.91 in) or more] sunshade.

caution

There are some small distances immediately before the closed position which cannot be detected.

note	If initialization setting is not performed, the anti-pinch function does not operate. When the distance between pinching position and fully-open position is less than 150 mm (5.91 in), sunroof or sunshade reverses to fully-open position.