1.CHECK POWER WINDOW MAIN SWITCH CIRCUIT
- Electric motor switch OFF, and then wait for 3 minutes with driver door open.
| note | - Even after electric motor switch is OFF, power is supplied to accessories for a certain amount of timer by the AUTO ACC function.
- When vehicle is operate while on standby, power may be supplied to accessories.
|
- Disconnect front power window motor (driver side) connector and power window main switch connector.
- Check continuity between front power window motor (driver side) harness connector and ground.
| Front power window motor (driver side) | — | Continuity |
| Connector | Terminal |
| D10 | 1 | Ground | Not existed |
Is the inspection result normal?
INSPECTION END
Repair or replace harness.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)