If any of the following operations are performed, the initialization is necessary for normal operation of power window system. Refer to Work Procedure.
Disconnection of the 12V battery terminal
When front power window motor (driver side) is replaced.
Power supply to the front power window motor (driver side) is not cut off properly.
Removal and installation of regulator assembly
Removal and installation of front power window motor (driver side) from regulator assembly
Operation of regulator assembly as an independent unit
Removal and installation of door glass
Removal and installation of door glass runchannel
caution
The following specified operations cannot be performed under the non-initialized condition.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
.