Component Inspection
1.
CHECK STOP LIGHT SWITCH
Turn the power supply mode of the electric motor switch to OFF.
Disconnect stop light switch connector.
Check continuity between stop light switch terminals.
Stop light switch
Condition
Continuity
Terminal
1
2
Brake pedal
Not depressed
Not existed
Depressed
Existed
3
4
Not depressed
Existed
Depressed
Not existed
Is the inspection result normal?
INSPECTION END
Replace stop light switch. Refer to
Exploded View
.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
INSPECTION END
Replace stop light switch. Refer to Exploded View
.