Key ID Verification Information
DESIGN/PURPOSE
If the system cannot detect a registered keyless operation key inside the vehicle, it informs the driver that it is necessary for the vehicle to detect a registered keyless operation key.
SYNCHRONIZATION WITH MASTER WARNING LIGHT
No applicable
SIGNAL PATH
- Keyless operation key unit activates keyless operation rear inner antenna and checks that keyless operation key is in vehicle, when electric motor switch operation is performed while electric motor switch position is OFF.
- When keyless operation key unit does not detect a registered keyless operation key in vehicle, meter display signal is transmitted by keyless operation key unit to combination meter via CAN communication.
- When combination meter receives meter display signal, key ID verification information displays.
WARNING/INDICATOR OPERATION CONDITION
When all of the following conditions are satisfied.
- Turn the power supply mode of the electric motor switch to OFF position.
- Electric motor switch operation is performed.
- Registered keyless operation key is not detected inside the vehicle.
WARNING/INDICATOR CANCEL CONDITION
When any of the following conditions are satisfied.
- After 5 seconds are passed since the key ID verification information is displayed.
- When keyless operation key backside is contacted to electric motor switch while brake pedal is depressed. And then turn the power supply mode of the electric motor switch to ON.
- Registered keyless operation key is detected inside the vehicle.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
)
)