[Previous][Next]
DTC Description
 
 
DTC DETECTION LOGIC
DTC No.Scan tool (M.U.T.-III SE) screen items
(Trouble diagnosis content)
DTC Detection Condition
B2F06-11Power liftgate/trunk opener switch
(Power liftgate/trunk opener switch)
Diagnosis condition Electric motor switch ON
Signal (terminal)Back door opener switch signal (BCM connector terminal: 98)
ThresholdWhen the BCM detects the open or shorted circuit of the back door opener switch
Diagnosis delay time1 second or less
 
 
POSSIBLE CAUSE
  • Back door opener switch
  • Harness or connectors (back door opener switch circuit is open or shorted)
  • BCM
 
 
FAIL-SAFE
—
 
 
DTC CONFIRMATION PROCEDURE
1.CHECK SELF-DIAG RESULT
With scan tool (M.U.T.-III SE)
  1. Turn the power supply mode of the electric motor switch to ON.
  2. Check “Diagnostic Trouble Code” mode of “BCM” using scan tool (M.U.T.-III SE).
Is DTC detected?
Refer to DTC Diagnosis ProcedureDiagnosis Procedure.
-1To check malfunction symptom before repair: Refer to Intermittent IncidentHOW TO COPE WITH INTERMITTENT MALFUNCTIONS.
-2Confirmation after repair: INSPECTION END