[Previous][Next]
DTC Description
 
 
DTC DETECTION LOGIC
DTC No.Scan tool (M.U.T.-III SE) screen items
(Trouble diagnosis content)
DTC detecting condition
B203D-14Inside antenna
(Keyless operation rear inner antenna)
Diagnosis conditionWork support “INSIDE/OUTSIDE ANT DIAGNOSIS”: activated
Signal (terminal)Keyless operation rear inner antenna signal (Keyless operation key unit connector terminal: 33, 34)
ThresholdKeyless operation rear inner antenna circuit is shorted to ground
Diagnosis delay time1 second or less
 
 
POSSIBLE CAUSE
  • Keyless operation key unit
  • Keyless operation rear inner antenna
  • Harness or connector (keyless operation rear inner antenna circuit is open or shorted)
 
 
FAIL-SAFE
–
 
 
DTC CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE
With scan tool (M.U.T.-III SE)
  1. Select “INSIDE/OUTSIDE ANT DIAGNOSIS” in “Special function” mode of “HANDS FREE MODULE”.
  2. Check the “Diagnostic Trouble Code” mode of “HANDS FREE MODULE” using scan tool (M.U.T.-III SE).
Is DTC detected?
Refer to DTC Diagnosis Procedure.
-1To check malfunction symptom before repair: Refer to Intermittent IncidentHOW TO COPE WITH INTERMITTENT MALFUNCTIONS.
-2Confirmation after repair: INSPECTION END