System Description

SYSTEM DIAGRAM

Component		Function
BCM		Recognizes the following status and transmits it to driver seat control unit via CAN communication. Electric motor switch ON signal Key ID signal
PHEV-ECU		PHEV-ECU transmits the shift position signal to driver seat control unit via CAN communication.
ABS actuator and electric unit (control unit)		ABS actuator and electric unit (control unit) transmits the vehicle speed signal to driver seat control unit via CAN communication.
AV control unit		AV control unit can be edit the user information.
Driver seat control unit		Refer to Driver Seat Control Unit.

DESCRIPTION

Log-in function is the function that registers the setting status of various systems and retrieves the status for each Keyless operation key as desired.
Registered information is automatically adjusted to the driving position (seat and door mirror position) registered by unlocking the driver side door with the Keyless operation key (Keyless operation key interlock function) or by operating the user selection function on the display.
When user selection is performed by display operation, the user information registered with another Keyless operation key can also be retrieved.
For details on Keyless operation key interlock function: Refer to System Description <Vehicle with navigation system> or System Description <Vehicle without navigation system>.

note

For the registration of the log-in function, the status is automatically registered as one of the following vehicle statuses when the electric motor switch is turned to OFF.

Item	Status
Electric motor switch position	ON
Navigation system	Activated
M.U.T.-III SE	Not connected

Operation Procedure

Electric motor switch ON.
Push desired user change switch on display.
Driver seat and door mirror will move to the memorized position.

Operation Condition

All of the following conditions must be satisfied in order to retrieve the registration information of the log-in function.

If one of the following conditions is not satisfied, the interlocked operation of the driving position for log- in function is interrupted.

Item	Request status
Electric motor switch position	ON
Navigation system	Activated
Switch inputs Power seat switch Lumbar support switch Door mirror remote control switch Set switch Memory switch	OFF (Not operated)
Shift position	P range
Log-in function memory	Registered
Vehicle speed	0 km/h (0 MPH)
M.U.T.-III SE	Not connected