[Previous][Next]
Disassembly and Assembly
 
 
 
 
<Seat control cable assembly>
Disassembly steps
1.Seat control lever
2.Seat control cable and seat slide cable connection
3.Seat control cable
 
 
<Seat cushion assembly (LH) >
Disassembly steps
1.Seat cushion assembly (LH)
2.Cover ring
3.Seat cushion trim (LH)
4.Seat cushion pad (LH)
 
 
<Seatback assembly (LH) >
Disassembly steps
1.Bolt (LH)
2.Reclining adjuster cover outer A (LH)
3.Reclining adjuster cover outer B (LH)
4.Reclining adjuster cover inner A (LH)
5.Reclining adjuster cover inner B (LH)
6.Seat belt buckle
7.Seatback assembly  (LH)
8.Hinge cover outer
9.Seatback strap
10.Hinge cover inner
11.Headrest holder A
12.Armrest assembly
13.Seatback board (LH)
14.Headrest holder B
15.Seatback release lever finisher A
16.Seat belt guide
17.Seatback release lever
18.Seat lever cable
19.Seatback pad
20.Second seat nut
21.Rear side air bag module, seatback trim (LH) and seatback pad (LH)
22.Second seat band
23.Rear side air bag module harness
24.Cover ring
25.Seatback trim (LH)
26.Rear side air bag module
27.Seatback pad (LH)
28.Seatback release lever finisher B
29.Seat belt
30.Reclining adjuster cover
31.Seatback frame
 
 
<Seat cushion frame>
Disassembly steps
1.Seat cushion guide
2.Cushion strap
3.Seat slide lever
4.Seat slide inner side (LH)
5.Seat slide outer side (LH)
6.Seat slide cable A
7.Seat slide cable B
8.Seat harness
9.Seat hook
10.Reclining adjuster cover
11.Seat cushion frame
 
 
<Seat cushion assembly (RH) >
Disassembly steps
1.Seat cushion assembly (RH)
2.Cover ring
3.Seat cushion trim (RH)
4.Seatback pad (RH)
 
 
<Seatback assembly (RH) >
Disassembly steps
1.Reclining adjuster cover inner A (RH)
2.Reclining adjuster cover inner B (RH)
3.Reclining adjuster cover outer A (RH)
4.Reclining adjuster cover outer B (RH)
5.Seat belt buckle
6.Seatback assembly (RH)
7.Seatback board (RH)
8.Headrest holder
9.Seatback release lever finisher A
10.Seatback release lever
11.Seat lever cable
12.Second seat nut
13.Rear side air bag module, seatback trim (RH) and seatback pad (RH)
14.Second seat band
15.Rear side air bag module harness
16.Cover ring
17.Seatback trim (RH)
18.Rear side air bag module
19.Seatback pad (RH)
20.Seatback release lever finisher B
21.Reclining adjuster cover
22.Seatback frame
 
 
<Seat cushion frame>
Disassembly steps
1.Seat lever cable
2.Seat slide cable
3.Seat cushion guide
4.Seat cushion strap
5.Seat slide lever
6.Seat slide outer side (RH)
7.Seat slide inner side (RH)
8.Seat harness
9.Reclining adjuster cover
10.Seat cushion frame
 
 
DISASSEMBLY SERVICE POINTS
 
 
<<A>> SEAT CONTROL CABLE AND SEAT SLIDE CABLE DISCONNECTION
1. Remove the cap on the vehicle rear side of the second seat control cable joint part.
2. Remove the weight piece.
3. Move the cap on the vehicle rear side forward to remove the cap on the vehicle front side as shown in the illustration.
4. Pull the strap by the seat cushion to fold down the seatback. Then remove the joint piece.
5. Remove the joint piece by passing the cable through the slit of the joint piece.
 
 
 
<<B>> HEADREST HOLDER REMOVAL
1. Remove the clips shown by the arrows in the illustration and remove the cup holder from the armrest assembly.
2. Remove the headrest holder.
 
 
 
<<C>> REAR SIDE AIRBAG MODULE HARNESS/SEATBACK TRIM/REAR SIDE AIRBAG MODULE REMOVAL
1. Use the flat-tipped screwdriver to pull out the locking button of wiring harness side connector, and release the lock.
caution
  • Be careful not to damage the seatback pad during work.
  • When pulling out the rear side airbag module from the airbag module storage part of the seatback trim, be careful not to damage the airbag module storage part.
2. Pull out the rear side airbag module and the airbag module storage part of the seatback trim from the upper side of the slit of the seatback pad.
3. Slide the rear side airbag module and the seatback trim diagonally upward to remove them from the slit of the seatback pad.
4. Remove the stud bolt of the rear side airbag module from the hole of the airbag module storage part of the seatback trim. Then remove the rear side airbag module from the airbag module storage part of the seatback trim.
 
 
 
 
ASSEMBLY SERVICE POINTS
 
 
>>A<< SEATBACK RELEASE LEVER FINISHER/SEATBACK PAD/REAR SIDE AIRBAG MODULE/SEATBACK TRIM/HOG RING INSTALLATION
cautionBe careful not to damage the seatback pad during work.
1. Set the rear side airbag module to the airbag module storage part of the seatback trim, and make the stud bolt of the rear side airbag module protrude from the hole of the airbag module storage part of the seatback trim.
2. Insert the rear side airbag module and the airbag module storage part of the seatback trim from the upper side of the slit of the seatback pad.
3. Check that there are no wrinkles on the airbag module storage part of the inserted seatback trim. If there are wrinkles, stretch them out.
4. Install the seatback pad, the seatback trim and the hog ring. Then install the seatback release lever finisher.
 
 
 
>>B<< SEATBACK RELEASE LEVER INSTALLATION
After the seatback trim is installed, install the seatback release lever to clip the seatback trim and the seatback release lever finisher.
 
 
>>C<< SEAT CONTROL CABLE AND SEAT SLIDE CABLE CONNECTION
1. Lift the stopper and lock the joint piece. Before connection in step 2, in order to confirm that the joint piece is locked, push the joint piece by a finger to the direction of the arrow and check that it cannot be pushed in.
2. Push the cable into the joint piece as shown in the illustration.
3.
cautionIf the stopper is accidentally pressed first and the joint piece got inside, pull out the joint piece according to the procedure below.
  1. Remove the cap at the front of the vehicle.
  2. Pull out the joint piece toward the front side of the vehicle.
  3. Pull up the stopper to lock the joint piece.
If the cable of the joint piece is pulled toward the seat control lever side and cannot be pulled out, release the cable fixing part on the seat control lever side, and press in the cable from the seat control lever side as shown in the illustration.
Push the stopper.