P1C00-55 HVAC2 Configuration is not completed
caution
Before replacing the ECU, ensure that the CAN bus lines is normal.
TROUBLE JUDGMENT
Check Condition
The IGCT power supply is ON.
Judgment Criterion
Configuration of the PHEV A/C amp. is not completed.
PROBABLE CAUSES
Malfunction of PHEV A/C amp.
note
The condition of this DTC is only the current failure.
DIAGNOSIS PROCEDURE
1.
After performing configuration of PHEV A/C amp., Check whether the DTC is set again.
(1)
Erase the set DTC.
(2)
Depress the brake pedal to change the power supply mode of the electric motor switch to ON (READY indicator: ON).
(3)
Check whether the DTC is set again.
Is the DTC set?
Replace PHEV A/C amp. Refer to
Removal and Installation
.
INSPECTION END
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
Replace PHEV A/C amp. Refer to Removal and Installation
.
INSPECTION END