[Previous][Next]
Component Inspection
1.CHECK INTAKE SENSOR
  1. Turn the electric motor switch OFF.
  2. Remove intake sensor. Refer to DISASSEMBLY AND ASSEMBLY.
  3. Check resistance between intake sensor terminals. Refer to applicable table for the normal value.
    TerminalConditionResistance: kΩ
    Temperature: °C (°F)
    12−20 (−4)23.60
    −10 (14)13.46
    0 (32) 8.00
    10 (50)4.93
    20 (68)3.14
    25 (77)2.54
    30 (86)2.06
    40 (104)1.39
Is the inspection result normal?
INSPECTION END
Replace intake sensor. Refer to DISASSEMBLY AND ASSEMBLY.