CONDENSER OUTLET TEMPERATURE SENSOR INSPECTION

1. Using the M.U.T.-III SE, read “Outer Condenser Outlet Refrigerant Temp Sensor Value” in the PHEV A/C amplifier, then write down the value.

2. Disconnect the condenser outlet temperature sensor connector.

3. Measure the resistance value between the terminals of the condenser outlet temperature sensor side connector.
Estimate the normal resistance value from the sensor value read in step 1 and the sensor value in the table below.
If it is out of standard value, replace the condenser outlet temperature sensor.

Terminal		Standard value
1	2	At -20°C (-4°F) : 15.11 – 15.70 kΩ
		At -10°C (14°F) : 9.35 – 9.58 kΩ
		At 0°C (32°F) : 5.94 – 6.06 kΩ
		At 10°C (50°F) : 3.87 – 3.96 kΩ
		At 20°C (68°F) : 2.57 – 2.66 kΩ
		At 30°C (86°F) : 1.75 – 1.83 kΩ
		At 40°C (104°F) : 1.22 – 1.29 kΩ
		At 50°C (122°F) : 0.87 – 0.92 kΩ
		At 60°C (140°F) : 0.63 – 0.67 kΩ
		At 70°C (158°F) : 0.46 – 0.50 kΩ
		At 80°C (176°F) : 0.35 – 0.37 kΩ