[Previous][Next]
DTC Description
 
 
DTC DETECTION LOGIC
DTC No.M.U.T.-III SE screen items
(Trouble diagnosis content)
DTC Detection Condition
B0002-1EDRIVER AIRBAG MODULE 2
(Driver Frontal Stage 2 Deployment Control)
Diagnosis conditionWhen electric motor switch is ON.
Signal (terminal)Driver air bag module signal
ThresholdDriver air bag module 2 circuit is shorted to driver air bag module 1.
(including the spiral cable)
Diagnosis delay time2 seconds or more.
 
 
POSSIBLE CAUSE
  • Connection malfunction or short circuit of harness and connector
  • Internal malfunction of driver air bag module
  • Internal malfunction of air bag diagnosis sensor unit
 
 
FAIL-SAFE
—
 
 
DTC CONFIRMATION PROCEDURE
1.CHECK DIAGNOSTIC TROUBLE CODE RESULT
With M.U.T.-III SE
  1. Electric motor switch ON.
  2. Perform "Diagnostic Trouble Code" mode of "AIR BAG" using M.U.T.-III SE.
Is malfunctioning part detected?
Refer to Diagnosis Procedure.
-1To check malfunction symptom before repair: Refer to Intermittent IncidentIntermittent Incident.
-2Confirmation after repair: INSPECTION END