[Previous][Next]
DTC Description
 
 
DTC DETECTION LOGIC
DTC No.M.U.T.-III SE screen items
(Trouble diagnosis content)
DTC Detection Condition
B00A0–8FOCCUPANT SENS UNIT
(Occupant Classification System)
Diagnosis conditionWhen electric motor switch is ON.
Signal (terminal)Occupant detection system control unit signal
ThresholdUndefined status of occupant detection system control unit
Diagnosis delay time2 seconds or more.
 
 
POSSIBLE CAUSE
  • Connection malfunction or open circuit of harness and connector
  • Internal malfunction of occupant detection system control unit
  • Internal malfunction of air bag diagnosis sensor unit
 
 
FAIL-SAFE
—
 
 
DTC CONFIRMATION PROCEDURE
1.CHECK DIAGNOSTIC TROUBLE CODE RESULT
With M.U.T.-III SE
  1. Electric motor switch ON.
  2. Perform "Diagnostic Trouble Code" mode of "AIR BAG" using M.U.T.-III SE.
Is malfunctioning part detected?
Refer to Diagnosis Procedure.
-1To check malfunction symptom before repair: Refer to Intermittent IncidentIntermittent Incident.
-2Confirmation after repair: INSPECTION END