[Previous][Next]
DTC Description
 
 
DTC DETECTION LOGIC
DTC No.M.U.T.-III SE screen items
(Trouble diagnosis content)
DTC Detection Condition
B0075-11PRE-TEN REAR RH
(Second Row Right Seat Belt Pretensioner Deployment Control)
Diagnosis conditionWhen electric motor switch is ON.
Signal (terminal)Rear seat belt pre-tensioner RH signal
ThresholdRear seat belt pre-tensioner RH circuit is shorted to ground
Diagnosis delay time2 seconds or more.
 
 
POSSIBLE CAUSE
  • Connection malfunction or short circuit to ground of harness and connector
  • Internal malfunction of rear seat belt pre-tensioner RH
  • Internal malfunction of air bag diagnosis sensor unit
 
 
FAIL-SAFE
—
 
 
DTC CONFIRMATION PROCEDURE
1.CHECK DIAGNOSTIC TROUBLE CODE RESULT
With M.U.T.-III SE
  1. Electric motor switch ON.
  2. Perform "Diagnostic Trouble Code" mode of "AIR BAG" using M.U.T.-III SE.
Is malfunctioning part detected?
Refer to Diagnosis Procedure.
-1To check malfunction symptom before repair: Refer to Intermittent IncidentIntermittent Incident.
-2Confirmation after repair: INSPECTION END